Trimble Outdoors 132RS Manuel d'utilisateur télécharger pdf (Page 76)

5 Configuring the Receiver

76 DSM 132/132RS Receiver User Guide

50.3 View location

To view the current location of the receiver antenna:

1. Navigate to the Configuration / Base Stn Config / Base Location

screen:

2. Press 4 one or more times to view the current computed

reference position, latitude, longitude, and altitude.

Note – The reference position coordinates are in

latitude/longitude; the datum is WGS-84; altitude is referenced

to Mean Sea Level (MSL).

50.1 Set from here

To set the receiver antenna location, select the current computed GPS

position as follows:

1. Navigate to the Base Location screen.

2. Press 3 to activate the cursor.

3. Press 1 or 2 until Set From Here is displayed.

4. Press 4. The receiver displays three screens in succession,

showing the current latitude, longitude, and altitude:

– To save the current coordinate value, press 4.

– To change the reference coordinate value, press 1 or 2.

Press 3 to move between characters. Press 4 to save the

changes.

5. When you press 4 to accept the altitude, the receiver asks

whether you want to accept the new reference position or not:

–Press 4 to accept the new reference position.

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 141 142

Pas de commentaire

Trimble Outdoors 132RS Manuel d'utilisateur Page 76