Trimble Outdoors 64057-00-ENG Manuel d'utilisateur télécharger pdf (Page 66)

A Trimble Standard Interface Protocol

64 Trimble ThunderBolt E GPS Disciplined Clock User Guide

TSIP Superpackets

Several packets have been added to the core TSIP protocol to provide additional

capability for the receivers. In packets 0x8E and their 0x8F responses, the first data

byte is a subcode which indicates the superpacket type. For example, in packet

0x8E-15, 15 is the subcode that indicates the superpacket type. Therefore the ID code

for these packets is 2 bytes long followed by the data.

Command Packet 0x8E-15: Request current Datum values

This packet contains only the subpacket ID, 0x15. The response to this packet is

0x8F-15.

Command Packet 0x8E-26: Write Configuration to NVS

This command packet causes the current configuration settings for all user segments

to be written to NVS.

Note – The ThunderBolt E configuration settings are partitioned into functional areas

(segments) each of which can be saved individually via Command Packet 0x8E-4C or set

to defaults via Command Packet 0x8E-45.

Command Packet 0x8E-41: Request Manufacturing Parameters

This packet is used to request the manufacturing parameters stored in non-volatile

memory. Send this packet with no data bytes (don't forget the subcode) to request

packet 0x8F-41.

Command Packet 0x8E-42: Stored Production Parameters

This packet is used to request the production parameters stored in non-volatile

memory. Send this packet with no data bytes (don't forget the subcode) to request

packet 0x8F-42.

6 Flow Control UINT8 0 None

7 Input Protocols UINT8 0 None

2TSIP

8 Output Protocols UINT8 0 None

2TSIP

9 Reserved UINT8 0 Reserved

Byte Item Ty pe Value Meaning

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 87 88

Pas de commentaire

Trimble Outdoors 64057-00-ENG Manuel d'utilisateur Page 66